how to install wall to wall carpet

how to install wall to wall carpet::The seamed edges of both carpet segments must be straight.
Place a piece of seaming tape under the seam, adhesive side up.
Heat the seaming iron to the temperature recommended by the tape manufacturer, and rest it directly on the tape for 15 to 30 seconds.
Then slowly slide the iron along the tape, and press the seam into the melted glue behind the iron.
After the pieces are joined, place heavy objects on the seam to hold it in place as the glue dries.
And make sure the pile of both pieces leans in the same direction.
Dryfit the carpet, butting one end against a wall.
Use a carpet knife to trim the carpet to fit around obstacles.
Attach the carpet to the tackless strips at one end of the room, using the knee kicker.
how to install wall to wall carpet::Start by removing the moldings
around the floor and take the door off the entrance, so you can get the
old carpet out and the new carpet in easier how to install wall to wall
carpet

Manu Sandoval Dorfhain blog

четверг, 29 сентября 2011 г.