best pad for carpet::It is made from scraps of foam used in furniture best pad for carpet

best pad for carpet::It is made from scraps of foam used in furniture.
These foam scraps are bonded together.
The three major types of pad are foam, fiber and rubber.
Other types of foam pad are prime and froth.
Basically, these are similar to rebond pad except they are made as a solid piece of foam instead of being made up of bits of recycled foam.
Froth foam is generally used in commercial application because it is thin and dense.
Rubber pad can come flat or in a waffle pattern.
I recommend staying away from the waffle pad as it does not support the carpet as well as other pads.
Rubber is a thin, firm pad so it is frequently used under berbers or on commercial jobs.
This type of pad is often referred to as felt.
The first carpet pads were fiber pads that were made of horse hair and jute.
Natural fibers, such as horse hair, are rarely used anymore.
Synthetic fibers such as nylon, polyester, and polypropylene are now widely used because they are cheaper to make.
All three types of pad are generally fine for home use.
Rebond is most widely used because it is the cheapest, yet wears just about as well as the other types.
Note: in some rare instances, rebond pad has been know to discolor light colored berber carpets.
If this is a concern for you, rubber or felt pads are fine alternatives.
The purpose of pad is not only to provide comfort.
The pad also acts as a shock absorber for your carpet, extending its life.
This is because a dense pad will not sink as much with each foot step.
This minimizes the pull on the carpet backing, preventing the latex in the backing from breaking down as quickly.
Carpet pad also supports the backing, preventing it from being smashed against the floor when you walk on it, thereby extending its life.
For rebond pad, most warranties generally require at least a 6pound pad for cut pile carpets and 8pound pad for looped carpets.
It makes that carpet feel more comfortable.
It makes your vacuum cleaner more efficient by helping the vacuum lift the carpet and provide better air circulation.
It can insulate your floor.
It can reduce noise.
Density: a measure of the weight of pad per cubic foot.
Higher density pads are better for high traffic areas.
Again, this is because it will minimize pull on the carpet backing.
A couple things you should know about pad installation: the pad should be stapled or glued to the floor to prevent movement.
The seams in the pad should be taped or sealed with a seam sealer.
You can generally look at it yourself and use your own judgment.
If it looks worn and matted in the high traffic areas, then you probably need to replace it.
If the high traffic areas look about the same as the areas that get very little traffic, then it is probably ok to use again.
best pad for carpet::Thick carpet padding is generally not only not
worth it, but may result in buckling, worn, or splitting carpet sooner
than you would think best pad for carpet